Wire Partitions |
|
|
|
 |
For over twenty-five years, Wire Crafters has manufactured a revolutionary style of woven wire partitions. Contrary to traditional wire partition systems, our Style 840 is based on the simple idea that 4' or 5' high panels stack one on top of the other between tubular posts to reach the finished wire partition height. This all welded, modular, stackable wire partition system has benefits unequaled in the industry. Click here for a quote form
Click here to view applications
|
 |
Base Plate Detail Of Wire Partition |
Corner Post Outside View Of Wire Partition |
|
Run Post Inside View Of Wire Partition |
Tee Post Inside View Of Wire Partition |
|
|
|
Style 840 panels are 1' to 10' wide, and 4' or 5' high. Full height wire partition walls are built by stacking two or more panels between standard posts. Posts are configured for a standard for a standard 3 1/4" sweep-space, and project 2" above the panels. Our standard panels can be used in ceilings or walls. Stack panels to any height by extending the length of the post. Flush to floor wire partition are made by modifying the post's standard hole layout. |
|
|
Woven Wire Panels
- Ten widths: 1'-0" to 10'-0" in one foot increments
- Two heights: 4'-0" and 5'-0"
- Standard Mesh: 10 gauge wire woven into 2" x 1" rectangular opening (other mesh available)
- Standard Frame: 1 1/4" x 1 1/4" x 1/8" steel angle
|
Ceilings
- Use same panels as walls
- Attach to partition walls with slotted angle
- Clear spanned to 35'
- Large ceilings supported by 2" square horizontal ceiling tubes
- Add to existing partition without changing layout
- All ceilings are non-load bearing
|
|
|
|
Stackable Panels |
Adjustable Panel |
|
|
|
Adjustable Panel
For hard to measure areas, use our sheet metal adjustable panel. It allows for partition width adjustments from 1" to 12". |
|
|
|
Posts
- Stock Sizes: 8'-5 1/4", and 12'-5 1/4"
- Standard hole layout allows for 3 1/4" sweep-space
- Posts project 2" above top of panel
- Standard baseplate: 2" x 7" with holes for anchors
- Special length posts are available to 40'
- Oversized base plates are available
- Floor anchors (3/8") are included with your order.
|
|
|
Stock Panel 4ft. High |
Stock Panel 5ft. High |
Stock Size Post |
|
Part No. |
W x H |
Weight |
Part No. |
W x H |
Weight |
Part No. |
Type |
Height |
Weight |
|
104 |
10' x 4' |
63 |
105 |
10' x 5' |
74 |
RP-8 |
Run |
8'-5 1/4" |
20 |
|
94 |
9' x 4' |
58 |
95 |
9' x 5' |
68 |
CP-8 / TP-8 |
Corner / Tee |
8'-5 1/4" |
21 |
|
84 |
8' x 4' |
53 |
85 |
8' x 5' |
63 |
RP-10 |
Run |
10'-5 1/4" |
23 |
|
74 |
7' x 4' |
46 |
75 |
7' x 5' |
54 |
CP-10 / TP-10 |
Corner / Tee |
10'-5 1/4" |
24 |
|
64 |
6' x 4' |
41 |
65 |
6' x 5' |
48 |
RP-12 |
Run |
12'-5 1/4" |
33 |
|
54 |
5' x 4' |
36 |
55 |
5' x 5' |
42 |
CP-12 / TP-12 |
Corner / Tee |
12'-5 1/4" |
33 |
|
44 |
4' x 4' |
31 |
45 |
4' x 5' |
36 |
Adjustable Panels |
|
34 |
3' x 4' |
23 |
35 |
3' x 5' |
27 |
Part No. |
Width x Height |
Weight |
|
24 |
2' x 4' |
18 |
25 |
2' x 5' |
22 |
AP8 |
1'-2 3/8" x 8' |
27 |
|
14 |
1' x 4' |
13 |
15 |
1' x 5' |
16 |
AP10 |
1'-2 3/8" x 10' |
33 |
|
|
|
|
|
|
Service Window |
|
|
|
|
|
|
Part No. |
Width x Height |
Weight |
|
All Weights are listed in pounds |
SW48P |
4'-0" x 8'-0" |
96 |
|
|
|
|
